User Manual Q&AAnswer
Jan 03, 2025 - 03:12 AM
To pair the LEXIN B4FM Bluetooth Headset with your phone, please follow these steps:
1. Make sure both the headset and your phone are powered on.
2. On the headset, long press the Power Button for about 5 seconds until the LED light flashes blue and red alternately. This indicates that the headset is in pairing mode.
3. On your phone, go to the Bluetooth settings and make sure Bluetooth is enabled.
4. In the Bluetooth settings, search for available devices. You should see "LX-B4FM" in the list of available devices.
5. Select "LX-B4FM" from the list and follow any additional prompts or enter a PIN if required. The default PIN for the headset is "0000".
6. Once the pairing is successful, the LED light on the headset will blink blue slowly, indicating that the connection is completed.
Note: The pairing process may vary slightly depending on your phone's operating system. Please refer to your phone's user manual for specific instructions on how to pair Bluetooth devices.
If you encounter any issues during the pairing process, please refer to the troubleshooting section of the user manual or contact LEXIN customer support for further assistance.
Add New Comment