User Manual Q&AAnswer
Jan 03, 2025 - 02:43 AM
To connect the BTA-250 amplifier to your speakers, follow these steps:
1. Ensure that the amplifier is powered off and disconnected from the power source.
2. Identify the speaker outputs on the back of the amplifier. They are labeled as "Speaker Output" or "Speaker A/B."
3. Depending on the type of speakers you have, you may need speaker wire or banana plugs to make the connections.
4. Strip the insulation from the ends of the speaker wire, if necessary.
5. Insert the exposed wire or banana plug into the corresponding speaker output terminals on the amplifier. The positive (+) terminal is usually marked with a red color or a "+" symbol, while the negative (-) terminal is marked with black or a "-" symbol.
6. Make sure the wire or banana plug is securely connected to the terminals and there is no loose connection.
7. Repeat the process for the other speaker output if you are connecting multiple speakers.
8. Now, locate the speaker inputs on your speakers. They are typically labeled as "Speaker Input" or "Positive (+)/Negative (-)".
9. Connect the other end of the speaker wire or banana plug to the corresponding speaker inputs on your speakers. Again, ensure a secure connection.
10. Repeat the process for the other speaker if you have a stereo setup.
11. Once all the connections are made, double-check that all the wires are properly connected and there are no loose connections.
12. Now, you can power on the amplifier and start enjoying your audio system.
Please refer to the user manual for more detailed instructions and illustrations on connecting the BTA-250 amplifier to your speakers.
Add New Comment