User Manual Q&AAnswer
Jan 03, 2025 - 02:02 AM
To clean the Audio-Technica ATH-AD500X headphones, follow these steps:
1. Cleaning the headphones: Use a cleaning cloth to wipe away dirt on the headphones. When cleaning the housing with a cloth, do not apply strong force. Dust the surface first, and then wipe the surface gently using a dry cloth.
2. Cleaning the cords: If the cords have become soiled (by perspiration, for instance), wipe them with a dry cloth immediately after use. Using dirty cords may cause them to deteriorate, become hard, and give rise to problems.
3. Cleaning the plug: Using the plug when it is dirty may cause intermittent sound or noise. When the plug is dirty, wipe it with a dry cloth.
4. Cleaning the earpads and headpads: To clean the earpads and headpads, wipe them with a dry cloth. If the earpads get wet, we recommend wiping them with a dry cloth and allowing them to dry in the shade. Please note that sweat or water drying on the earpads may cause them to fade.
It is important to avoid using alcohol, paint thinners, or other solvents for cleaning purposes, as they may damage the headphones. Take care to keep the plug and adapter clean, as a dirty adapter or plug could result in unwanted noise
Add New Comment