User Manual Q&AAnswer
Jan 03, 2025 - 01:22 AM
To pair your TP-Link BS1001 Portable Bluetooth Speaker with a Bluetooth device, please follow these steps:
1. Ensure that the speaker has sufficient power or is connected to a power source.
2. Short press the power button on the speaker.
3. The blue power indicator will turn on, and the Bluetooth pairing indicator will start flashing.
4. Put your Bluetooth device (e.g., a mobile phone) into searching mode, similar to when you search for a new Bluetooth device on your phone.
5. In the list of Bluetooth devices on your phone, you should see "Groovi Ripple" as an available device.
6. Select "Groovi Ripple" and, if prompted, enter "0000" as the pairing code.
7. The blue LED on the speaker will stop blinking and stay blue, indicating a successful pairing.
8. Check your Bluetooth device to ensure that the connection is successful.
9. To turn off the speaker, press the power button. If no audio input is received, the speaker will automatically shut down after 30 minutes.
Note: If you want to connect the speaker to another Bluetooth device, you must first disconnect the current Bluetooth connection. Long press the power button to enter a new device searching and pairing mode. The speaker will automatically reconnect to the previously paired device by default when restarted. If the automatic connection fails, you will need to manually establish the connection.
For more detailed instructions and safety information, please refer to the TP-Link BS1001 Portable Bluetooth Speaker User Manual.
Add New Comment