User Manual Q&AAnswer
Jan 02, 2025 - 11:38 PM
To install the Digoo 433MHz New Door & Window Alarm Sensor, follow these steps:
1. Choose the location: Select a suitable location on your door or window where you want to install the sensor. Make sure it is within the triggering distance of over 20mm.
2. Mount the sensor: Attach the sensor to the door or window using adhesive tape or screws. The larger part of the sensor should be attached to the door/window frame, and the smaller part should be attached to the door/window itself.
3. Install the anti-theft button: Mount the anti-theft button at the mounting of the door. This button will be pressed by the sensor when it is in place.
4. Test the installation: Close the door or window to ensure that the sensor and anti-theft button are aligned properly. Open the door or window to trigger the sensor and check if the alarm sounds.
Note: Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment