User Manual Q&AAnswer
Jan 02, 2025 - 11:26 PM
To install the Aqara Zigbee Wireless Human Body PIR Sensor, you have a few options. First, you can place the sensor where you need it. Alternatively, you can remove the protective film and stick it to the desired position. Lastly, you can stick the sensor to the stand and place the stand where you need it. It is important to keep the surface clean and dry for proper installation. The recommended installation height is between 1.2 m to 2.1 m. If the installation height is below 1.2 m, the detection area will decrease, and if it is above 2.1 m, there might be blind spots in the detection area. Make sure to align the lens with the detection area when installing and place it as close as possible to the edge of a table or cabinet.
Please refer to the user guide for more detailed instructions and illustrations on the installation process.
Add New Comment