User Manual Q&AAnswer
Jan 02, 2025 - 11:21 PM
To connect the JENSEN JXHD35 Weatherproof Surface Mount Speakers to a stereo's wiring harness, please follow these steps:
1. Locate the set of positive and negative speaker terminals on the back of the speaker unit.
2. Identify the positive and negative wires from your stereo's wiring harness.
3. Strip a small portion of insulation from the ends of the speaker wires to expose the bare wire.
4. Connect the positive wire from your stereo's wiring harness to the positive terminal on the speaker unit. This is usually indicated by a "+" symbol or a red-colored terminal.
5. Connect the negative wire from your stereo's wiring harness to the negative terminal on the speaker unit. This is usually indicated by a "-" symbol or a black-colored terminal.
6. Ensure that the connections are secure and that the wires are not touching each other.
7. Repeat the above steps for the second speaker if you are connecting a stereo pair.
Please note that the JENSEN JXHD35 Weatherproof Surface Mount Speakers require being wired to their audio source and do not have a built-in power source or batteries.
Add New Comment