User Manual Q&AAnswer
Jan 02, 2025 - 11:05 PM
To connect your NAXA Bluetooth soundbar to your TV, follow these steps:
1. Make sure both the soundbar and your TV are powered off.
2. Locate the audio output port on your TV. This is usually labeled as "Audio Out" or "Digital Audio Out" and may be a headphone jack or an optical audio output.
3. Depending on the type of audio output port on your TV, you will need to use the appropriate cable. If your TV has a headphone jack, you can use a 3.5mm AUX cable. If your TV has an optical audio output, you will need an optical cable.
4. Connect one end of the cable to the audio output port on your TV.
5. Connect the other end of the cable to the corresponding input on the soundbar. For example, if you are using a 3.5mm AUX cable, plug it into the "AUX IN" port on the soundbar.
6. Once the cables are securely connected, power on both the soundbar and your TV.
7. On the soundbar remote control, press the "Standby/Source" button repeatedly until you see the desired input mode on the soundbar's display. For example, if you connected the soundbar to the TV using the AUX cable, select the "AUX" mode.
8. Adjust the volume on the soundbar using the volume buttons on the remote control or the soundbar itself.
Your NAXA Bluetooth soundbar should now be connected to your TV and ready to use. If you encounter any issues, refer to the user manual for troubleshooting tips or contact NAXA customer support for further assistance.
Add New Comment