User Manual Q&AAnswer
Jan 02, 2025 - 11:02 PM
To connect your Monitor Audio Silver FX 7G surround speakers, follow these steps:
1. Ensure that your amplifier or receiver is turned off and unplugged from the power source.
2. Identify the speaker wire terminals on the back of each Silver FX 7G speaker. These terminals are recessed into the cabinet for a flush fit.
3. Strip a small portion of insulation from the ends of your speaker wire, exposing the bare wire.
4. Insert the bare wire into the corresponding speaker wire terminals on each speaker. The positive (+) terminal is typically marked with a red indicator, while the negative (-) terminal is marked with a black indicator.
5. Tighten the terminals securely to ensure a solid connection.
6. Repeat the process for each speaker in your surround sound setup.
7. Once all the speakers are connected, connect the other end of the speaker wire to the corresponding speaker outputs on your amplifier or receiver. Ensure that you match the positive and negative terminals correctly.
8. Double-check all connections to ensure they are secure and properly matched.
9. Plug in and turn on your amplifier or receiver, and follow the manufacturer's instructions for setting up and configuring your surround sound system.
For more detailed instructions and safety information, please refer to the "Connection" section in the Operational Guide provided with your Monitor Audio Silver FX 7G speakers.
Add New Comment