User Manual Q&AAnswer
Jan 02, 2025 - 10:52 PM
To install the Blue Octave LW52 in Wall Speakers, follow these steps:
1. Determine the desired location for the speakers on the wall. Position them at roughly 90 to 110 degrees relative to the listener's position and place them well above ear level to avoid any distracting or unnatural ambient noise processing.
2. Use the provided cut-out templates to mark the exact location for the speakers on the wall.
3. Cut out the marked area on the wall using appropriate tools, ensuring that the cut-out size is 6.3" x 9.72" per speaker.
4. Connect the speakers to a receiver or amplifier using the provided spring-loaded raw wire connections. Ensure proper polarity (positive to positive, negative to negative) when connecting the wires.
5. Place the speakers into the cut-out holes and secure them using the unique wall-lock mounting system. No additional mounting hardware is needed.
6. Once the speakers are securely mounted, you can paint the frames and grills to match your wall color if desired.
7. Repeat the above steps for the second speaker.
8. After installation, adjust the speakers' positioning and angle to optimize sound projection.
Please refer to the complete instruction guide provided with the Blue Octave LW52 in Wall Speakers for more detailed installation instructions and safety precautions
Add New Comment