User Manual Q&AAnswer
Jan 02, 2025 - 10:51 PM
To connect the Numark WS1009268 Wireless Microphone System to your sound system, follow these steps:
1. Ensure that both the receiver and the sound system are powered off.
2. Locate the audio output ports on the receiver. These ports are usually labeled as "Audio Out" or "Line Out."
3. Use an appropriate audio cable (such as an XLR or 1/4" cable) to connect the audio output ports of the receiver to the corresponding audio input ports on your sound system. The specific type of cable will depend on the available input ports on your sound system.
4. Make sure the connections are secure and tight.
5. Power on both the receiver and the sound system.
6. Set the input source on your sound system to the connected input ports.
7. Turn on the wireless microphone transmitter and ensure it is within range of the receiver.
8. Adjust the volume levels on both the receiver and the sound system to achieve the desired audio levels.
Please refer to the Numark WS1009268 Wireless Microphone System User Guide for more detailed instructions and troubleshooting tips.
Add New Comment