User Manual Q&AAnswer
Jan 02, 2025 - 10:13 PM
To pair the Sena SPH10H-FM-01 with your smartphone, follow these steps:
1. Turn on the Sena SPH10H-FM-01 headset by pressing and holding the Jog Dial for about 5 seconds until the LED starts flashing red and blue.
2. On your smartphone, go to the Bluetooth settings and make sure Bluetooth is enabled.
3. Search for available Bluetooth devices on your smartphone. The Sena SPH10H-FM-01 should appear as "SPH10H-FM" in the list of available devices.
4. Select "SPH10H-FM" on your smartphone to initiate the pairing process.
5. The Sena SPH10H-FM-01 will ask you to confirm the pairing request by saying "Phone pairing, please confirm." You can confirm by saying "Yes" or pressing the Jog Dial.
6. Once the pairing is successful, the Sena SPH10H-FM-01 will emit a beep and the LED will turn blue.
7. Your smartphone should now show that it is connected to the Sena SPH10H-FM-01 headset.
Please note that the exact steps may vary depending on your smartphone model and operating system. For more detailed instructions and troubleshooting tips, refer to the Sena SPH10H-FM-01 Motorcycle Bluetooth Stereo Headset and Intercom User Guide provided in the link.
Add New Comment