User Manual Q&AAnswer
Jan 02, 2025 - 09:11 PM
To pair the Spracht Zum-BT-TWS-2 Truly Wireless Earbuds with your Bluetooth device, follow these steps:
1. Turn on the Bluetooth function on your device (e.g., smartphone, tablet).
2. Take the earbuds out of the charging case. They will turn on automatically. If they are off, press the Multi-Function Button (MFB) on the center of the earbuds for about 3 seconds until the white LEDs flash and the earbuds say "Power on".
3. The earbuds should enter TWS pairing mode automatically. The red and white LEDs on the earbuds will flash slowly and alternately. If you had previously paired with a Bluetooth device, they will re-pair. If the earbuds are powered off prior to pairing, press the MFB for 8 seconds until the white and red LEDs flash alternately. You will hear "Pairing".
4. On your device's Bluetooth list, you should see "Zum-TWS-L" or "Zum-TWS-R". Choose the one you want to pair. You should hear "Phone is connected".
5. The phone may show a pop-up dialog asking to pair with the headset. If you click "Pair", the second earbud will connect to the phone. The earbuds will be able to switch primary/secondary functions.
6. To power off the earbuds, press the MFB for about 5 seconds until you hear "Power off". The earbuds will automatically power off if you put them back in the charging case.
Note: If you want to use only one earbud, pair either the left (L) or right (R) side and turn off the other side. If you want to use both earbuds in stereo mode, make sure to pair the left (L) earbud first. If you pair the right (R) earbud first, the left one will not connect afterward in stereo mode.
Add New Comment