User Manual Q&AAnswer
Jan 02, 2025 - 09:09 PM
To connect the Earthquake Sound MiniMe-P63 subwoofer to your audio system, follow these steps:
1. Determine the type of connection you will be using. The MiniMe-P63 subwoofer offers both low-level RCA inputs and Bluetooth/WiFi inputs.
2. If you are using the low-level RCA inputs, connect the RCA cables from the subwoofer output of your amplifier or receiver to the low-level RCA inputs on the MiniMe-P63 subwoofer. Use a "Y" RCA cable if you have a mono subwoofer output.
3. If you are using the Bluetooth/WiFi inputs, you can connect a Bluetooth or WiFi adapter (sold separately) to the BT/WiFi power port on the MiniMe-P63 subwoofer. This will provide power to the adapter.
4. Set the AUTO/ON/OFF switch on the control panel of the MiniMe-P63 subwoofer to the desired setting. When set to ON, the amplifier will remain on regardless of signal presence. When set to AUTO, the amplifier will only turn on when audio signal is detected. When set to OFF, the amplifier will remain off regardless of signal presence.
5. Set the volume control xxxx on the control panel to the desired level. Start at the lowest setting and gradually increase the volume until the desired subwoofer level is reached.
6. Adjust the 0-180° phase adjustment switch on the control panel to synchronize the subwoofer with your main speakers for better bass response.
7. Use the 40-180Hz frequency adjustment xxxx on the control panel to set the subwoofer's cut-off frequency. Signals above the set crossover frequency will be gradually rolled off to prevent interference with the surround speakers.
8. Once you have made the necessary connections and adjustments, power on your audio system and enjoy the enhanced bass performance of the Earthquake Sound MiniMe-P63 subwoofer.
Please refer to the user manual for additional information and safety instructions.
Add New Comment