User Manual Q&AAnswer
Jan 02, 2025 - 08:55 PM
To pair the Aluratek ABCT01F Bluetooth Audio Cassette Receiver with your smartphone, please follow these steps:
1. Make sure the ABCT01F is turned off. If it's already on, press and hold the Power button for 3-5 seconds to turn it off.
2. Press and hold the Power button on the ABCT01F for 6-7 seconds until the LED flashes red and blue alternately. This puts the ABCT01F into pairing mode.
3. On your smartphone, go to the Bluetooth settings. This is usually found in the Settings menu.
4. Enable Bluetooth on your smartphone if it's not already enabled.
5. Your smartphone will start scanning for Bluetooth devices. Wait for it to detect the ABCT01F. It should appear as "ABCT01F" or a similar name.
6. Select the ABCT01F from the list of available devices on your smartphone.
7. If prompted, enter the PIN code "0000" to pair the devices. Some devices may not require a PIN code.
8. Once the pairing is successful, the LED on the ABCT01F will flash blue once every 3 seconds.
9. Set the audio output of your smartphone to Bluetooth or ABCT01F to stream audio through the ABCT01F.
Note: The pairing mode of the ABCT01F will last for 5 minutes. If no devices can be connected within 5 minutes, the ABCT01F will turn off automatically.
For more detailed instructions and troubleshooting tips, please refer to the user guide of your smartphone and the Aluratek ABCT01F Bluetooth Audio Cassette Receiver.
Add New Comment