User Manual Q&AAnswer
Jan 02, 2025 - 06:08 AM
To connect your Vivitek D560ST XGA DLP Portable Projector to your laptop, you will need to follow these steps:
1. Ensure that both the projector and your laptop are powered off.
2. Locate the VGA or HDMI port on your laptop. The Vivitek D560ST XGA DLP Portable Projector supports both VGA and HDMI connections.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Power on your laptop and the projector.
7. On your laptop, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
8. In the display settings, select the option to extend or duplicate your display to the projector. This will vary depending on your operating system.
9. Adjust the focus and zoom of the projector if needed.
10. You should now see your laptop screen projected onto the projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Vivitek D560ST XGA DLP Portable Projector. You can find the manual at the following link: [Vivitek D560ST XGA DLP Portable Projector User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment