User Manual Q&AAnswer
Jan 02, 2025 - 05:58 AM
To connect your Vivitek D837 projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. If your computer has a VGA port, use a VGA cable to connect the computer's VGA port to the projector's VGA port. If your computer has an HDMI port, use an HDMI cable to connect the computer's HDMI port to the projector's HDMI port.
4. Once the cables are securely connected, turn on your computer and then turn on the projector.
5. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can access the display settings by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
6. In the display settings, choose the option to extend or duplicate the display to the projector.
7. Adjust the projector's focus and keystone correction if necessary to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, please refer to the owner's guide, which can be found in the provided link.
Add New Comment