User Manual Q&AAnswer
Jan 02, 2025 - 05:56 AM
To connect your laptop to the ViewSonic PJD6550LW projector using an HDMI cable, please follow these steps:
1. Make sure your laptop and the projector are powered off.
2. Locate the HDMI input port on the back of the projector. It should be labeled as "HDMI IN."
3. Connect one end of the HDMI cable to the HDMI output port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the projector.
5. Power on both your laptop and the projector.
6. Press the "Input" or "Source" button on the projector's control panel or remote control to select the HDMI input source.
7. The projector should now display the content from your laptop.
Note: Depending on your laptop's settings, you may need to adjust the display settings to ensure the content is mirrored or extended to the projector. Refer to your laptop's user manual for instructions on how to do this.
For more detailed instructions and troubleshooting tips, please refer to the ViewSonic PJD6550LW User Guide, specifically the section on "Connecting the Projector to a Computer" (page 15) in the provided manual.
Add New Comment