User Manual Q&AAnswer
Jan 02, 2025 - 04:53 AM
To connect your Epson V11H688020 LCD Projector PowerLite 97H to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and wait for it to fully boot up.
6. Turn on the projector by pressing the Power button.
7. Use the projector's remote control to select the correct input source. Press the Input button on the remote control and choose the appropriate input option (e.g., Computer, HDMI, etc.).
8. Adjust the projector's focus and zoom if necessary.
9. Your computer's screen should now be displayed through the projector.
For more detailed instructions and troubleshooting tips, please refer to the Epson V11H688020 LCD Projector PowerLite 97H User Manual.
Add New Comment