User Manual Q&AAnswer
Jan 01, 2025 - 11:38 PM
To mount the Pyle PLMR22WT Waterproof Off-Road Speakers on your vehicle, you will need to follow these steps:
1. Determine the diameter of your roll-bar or roll-cage: Measure the diameter of your vehicle's roll-bar or roll-cage to ensure proper fitment of the mounting bracket.
2. Choose the appropriate screws: The mounting bracket is designed to fit diameters ranging from 0.94 to 1.18 inches. Use the provided 25mm screws for installation.
3. Loosen the rotation adjustment xxxx : Locate the rotation adjustment xxxx on the mounting bracket and loosen it to allow for rotation.
4. Position the lower mounting bracket: Rotate the lower mounting bracket to the desired position for optimal speaker placement.
5. Lock the rotation adjustment xxxx : Once you have positioned the lower mounting bracket, tighten the rotation adjustment xxxx to secure it in place.
By following these steps, you should be able to properly mount the Pyle PLMR22WT Waterproof Off-Road Speakers on your vehicle's roll-bar or roll-cage. For further assistance or clarification, you can refer to the user manual or contact Pyle's customer support at (1) 718-535-1800 or via email at support@pyleusa.com.
Add New Comment