User Manual Q&AAnswer
Jan 01, 2025 - 11:30 PM
The installation process for the Memphis MXA80L 2-Way Marine Grade Construction Coaxial Speakers is relatively straightforward. Here are the steps to install them:
1. Start by disconnecting the power source to avoid any electrical accidents.
2. Determine the location where you want to install the speakers. Ensure that there is enough space and that the speakers will fit properly.
3. Remove any existing speakers or speaker grills from the chosen location.
4. Connect the speaker wires to the speaker terminals on the back of the MXA80L speakers. Ensure that the positive (+) wire is connected to the positive terminal and the negative (-) wire is connected to the negative terminal.
5. Carefully mount the speakers in the chosen location using the appropriate mounting hardware. Make sure they are securely fastened.
6. Connect the speaker wires to the audio source or amplifier. Again, ensure that the positive and negative wires are correctly connected.
7. Double-check all connections to ensure they are secure and properly insulated.
8. Once everything is connected, restore the power source and test the speakers to ensure they are working correctly.
Please refer to the instruction manual for more detailed installation instructions and diagrams specific to the Memphis MXA80L 2-Way Marine Grade Construction Coaxial Speakers.
Add New Comment