User Manual Q&AAnswer
Jan 01, 2025 - 11:19 PM
The Polk Audio DB842-DVC ATV & Car Subwoofer can be wired in various configurations depending on your desired impedance load. Here are the wiring options:
1. Single Voice Coil Hookup:
- Single 4 Ohm Load: If you have a single 4 Ohm speaker, it will present a 4 Ohm load.
- Dual 4 Ohm Load: If you have a dual 4 Ohm speaker, you can wire the coils in parallel to present a 2 Ohm load or wire them in series to present an 8 Ohm load.
2. Multiple Subwoofers:
- Two dual 4 Ohm speakers: You can wire the coils in series and the speakers in parallel to present a 4 Ohm load.
- Two dual 4 Ohm speakers (not recommended unless amplifier is rated for 1 Ohm operation): You can wire the coils and speakers in parallel to present a 1 Ohm load.
- Three dual 4 Ohm speakers: You can wire the coils in series and the speakers in parallel to present a 2.7 Ohm load.
Please make sure to check if your amplifier is rated to handle the specified load to avoid any damage.
For more detailed information and diagrams, you can refer to the Polk Audio DB842-DVC ATV & Car Subwoofer User Guide.
Add New Comment