User Manual Q&AAnswer
Jan 01, 2025 - 10:55 PM
To connect your device to the AAXA Technologies M6 Full HD Micro LED Projector, follow these steps:
1. Make sure the projector is turned off and your device is powered on.
2. Identify the appropriate connection port on the projector for your device. The M6 projector offers multiple connectivity options, including HDMI, USB, VGA, and AV.
3. Prepare the necessary cables for your connection. For example, if you are using an HDMI connection, ensure you have an HDMI cable available.
4. Connect one end of the cable to the corresponding port on your device (e.g., HDMI port on your laptop) and the other end to the corresponding port on the projector.
5. Turn on the projector and select the correct input source. Use the projector's remote control or the control buttons on the projector itself to navigate the menu and select the appropriate input source (e.g., HDMI, USB, VGA).
6. Ensure that your device's display output is set to mirror or extend to the projector. This setting can usually be adjusted in your device's display settings.
7. Once the connection is established and the input source is selected, you should see the content from your device displayed on the projector screen.
For more detailed instructions and illustrations, please refer to the user guide provided by AAXA Technologies for the M6 Full HD Micro LED Projector. The user guide contains step-by-step instructions and troubleshooting tips to assist you in connecting your specific device to the project
Add New Comment