User Manual Q&AAnswer
Jan 01, 2025 - 10:36 PM
To connect the Jamo 8-Series Floorstanding Dolby Atmos Ready Speakers to your audio system, follow these steps:
1. Identify the inputs on the speakers: The speakers have single binding posts for the main and height channels.
2. Prepare your audio system: Ensure that your audio system has compatible outputs for connecting to the speakers. You will need separate outputs for the main and height channels if you want to utilize the Dolby Atmos feature.
3. Connect the main channel: Use speaker wire to connect the main channel output of your audio system to the main channel input on the speakers. Make sure to match the positive (+) and negative (-) terminals on both ends of the wire.
4. Connect the height channel (optional): If you want to use the Dolby Atmos feature, connect the height channel output of your audio system to the height channel input on the speakers using speaker wire. Again, match the positive (+) and negative (-) terminals.
5. Repeat the above steps for additional speakers: If you have multiple Jamo 8-Series speakers, repeat the connection process for each speaker, ensuring that you connect the correct channels.
6. Power on your audio system and speakers: Once all the connections are made, power on your audio system and speakers. Make sure to follow any additional setup instructions provided by your audio system or Dolby Atmos receiver.
7. Test the speakers: Play audio content that supports Dolby Atmos or regular stereo sound to test the speakers. Adjust the volume and settings on your audio system as needed.
For more detailed instructions and safety information, refer to the user manual provided with the Jamo 8-Series Floorstanding Dolby Atmos Ready Speakers.
Add New Comment