User Manual Q&AAnswer
Jan 01, 2025 - 10:33 PM
To install the in your vehicle, please follow these steps:
1. Mounting: Find a suitable spot in your vehicle to mount the subwoofer enclosure. The enclosure should be securely mounted to a flat surface using the supplied hardware. For the AS-6 model, install the supplied mounting feet to the enclosure using the supplied hardware. The feet can be rotated to fit the floor of the vehicle.
2. Wiring the Harness: If you are installing the subwoofer on a gas or diesel vehicle, wire the Negative (Black) wire on the subwoofer harness to the Negative (-) battery terminal, and wire the Positive (Red) wire on the subwoofer harness to the Positive (+) battery terminal. If you are installing the subwoofer on an electric vehicle, switch it into TOW mode and wire the Negative (Black) wire on the subwoofer harness to Ground on the DC-DC Converter, and wire the Positive (Red) wire on the subwoofer harness to the Positive (+) post on the DC-DC converter.
3. Remote Turn On Wire: Route the Blue Remote Turn On Wire to a location where it can connect to the Remote Turn On Output from the source unit. If you are using the Wet Sounds Stealth Sound Bar, this will be a blue wire. On a traditional head unit, this wire is often labeled "power antenna remote". Make sure the AUTO TURN ON switch on the amplifier built into the subwoofer is in the "REM" position if you are using this turn on method.
4. Signal Input: Route the 3.5mm plug labeled "Signal Input" to a location where it can connect to an audio output from the source unit. On Wet Sounds Sound Bars, this is a 3.5mm jack labeled "AUX OUT". If you are using a traditional head unit with RCA style preamp output, a 3.5mm-RCA adapter may be needed.
5. Remote Level Control: Route the 3.5mm jack labeled "Remote Level Control" to a location where it can connect to the supplied Remote Level Control. This control allows easy adjustment of the overall output of the subwoofer, so mount it in a location that is accessible.
6. Amplifier Adjustments: The manual provides detailed instructions on how to adjust the Auto Turn On switch, Gain, Variable Crossover Network, Variable Bass Boost, and Phase Control. Follow these instructions to optimize the performance of your subwoofer.
Please refer to the complete instruction manual for additional information and diagrams to assist with the installation process.
Add New Comment