User Manual Q&AAnswer
Jan 01, 2025 - 10:00 PM
To connect your TV to the ZVOX SoundBase 670 Sound Bar, you can use the optical digital audio output on your TV. Here are the step-by-step instructions:
1. Locate the optical digital output on your TV. It is usually labeled as "Optical Out" or "Digital Audio Out" and looks like a small square or rectangular port.
2. Take the optical digital cable that came with the SoundBase 670 and connect one end to the optical digital output on your TV.
3. Take the other end of the optical digital cable and connect it to the optical digital input labeled "Optical 1" on the back of the SoundBase 670.
4. Make sure the SoundBase 670 is powered on and set to the correct input. You can use the remote control or the buttons on the unit itself to select the "Optical 1" input.
5. Adjust the volume on the SoundBase 670 to your desired level using the remote control or the buttons on the unit.
By following these steps, you should be able to successfully connect your TV to the ZVOX SoundBase 670 Sound Bar using the optical digital audio connection.
Add New Comment