User Manual Q&AAnswer
Jan 01, 2025 - 09:54 PM
To connect the Avenview HDMI Quad Multiviewer, follow these steps:
1. Connect your HDMI sources (such as computers, DVD players, or gaming consoles) to the HDMI inputs on the Matrix Switch (SW-HDM3D-C6-4x4E).
2. Connect each HDMI CAT5/6 output on the SW-HDM3D-C6-4x4E to the respective CAT5/6 input on the remote receiver HDM3D-C6SW-R.
3. Connect the IR BLASTER cable to the SW-HDM3D-C6-4x4E and direct the IR emitter to the built-in IR receiver of the sources.
4. Connect the +5V 6A DC power supply to the SW-HDM3D-C6-4x4E.
5. Power on all HDMI sources.
6. Power on the SW-HDM3D-C6-4x4E.
7. Connect each HDMI output of the remote receiver to HDMI displays.
8. Connect the CAT5E/6 INPUT on the HDM3D-C5SW-R to the CAT5E/6 OUTPUT port on the SW-HDM3D-C6-4x4E.
9. Connect the IR receiver and place it in a position where it can receive the IR command signals from the users.
10. Dial the 8-level rotary control switch on the HDM3D-C6SW-R to adjust the HDMI signal level until the picture and sound are clear.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment