User Manual Q&AAnswer
Jan 01, 2025 - 09:25 PM
To install the MB QUART NF1-116B marine speakers in your boat, please follow these steps:
1. Confirm Fit and Mounting Location: Ensure that the speaker fits properly in the designated mounting location. If you are replacing an older speaker, make sure the new speaker fits in the hole for the old speaker. If you are creating a new location, verify that there is sufficient depth to mount the speaker.
2. Wiring: Carefully select a route for the speaker wires. If you are using existing speaker wires, check that they are in good shape and not shorted. Run the speaker wires only through safe areas, avoiding contact with metal edges or hot engine components.
3. Speaker Installation: Once you have confirmed the fit and wiring, connect the positive and negative wires to the proper terminals on the speaker. Securely xxxx the speaker into place.
Please note that it is always recommended to consult a professional audio installer if you have any doubts or concerns about the installation process. They can provide expert guidance and ensure a proper installation.
For more detailed information on system settings, speaker and subwoofer configuration, and full specifications, you can visit the MB QUART website at mbquart.com. Additionally, the operational manual provided with the speakers may contain specific instructions and guidelines for installation.
Add New Comment