How do I install the CERWIN Vega XED62 coaxial speakers in my car? (Cerwin Vega XED62 2-Way Coaxial Speaker Set Operational Manual)

Answer

manuals.plus

Jan 01, 2025 - 09:23 PM


The installation process for the CERWIN Vega XED62 coaxial speakers is outlined in the operational manual provided. Here are the steps to install the speakers:

1. Tweeter Installation: The tweeters can be flush or surface mounted. Make sure the desired location can accommodate the hole sizes and depth required. The manual provides detailed instructions on how to mount the tweeters using the provided hardware.

2. Crossover Installation: If you need to install the passive crossovers in the doors, make sure to install them behind the door panel instead of inside the door itself. Connect the input side labeled "AMP" of each passive crossover to the amplifier's speaker output terminals. Connect the middle terminals labeled "MID" to the midrange speaker, and connect the end terminals labeled "TWT" to the tweeter.

3. Speaker Installation: The manual recommends isolating the front sound waves of the speaker from its rear sound waves by securely mounting the speaker to a flat surface known as a baffle. Seal the speaker to ensure there are no air leaks around its frame. The manual provides instructions for rear deck mounting, which can be done through top or bottom mounting methods.

Please refer to the operational manual for detailed instructions, illustrations, and additional information on the installation process. If you have any further questions, you can contact your local authorized Cerwin Vega Mobile dealer or the Cerwin Vega Mobile Technical Support Department.