User Manual Q&AAnswer
Jan 01, 2025 - 09:08 PM
To connect your Optoma LH150 DLP Projector to your laptop, follow these steps:
1. Make sure both your projector and laptop are powered off.
2. Locate the HDMI or VGA port on your laptop. Most laptops have an HDMI port, but if your laptop only has a VGA port, you will need an HDMI to VGA adapter.
3. Connect one end of the HDMI cable (or HDMI to VGA adapter) to the HDMI port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the back of the projector.
5. Power on your laptop and the projector.
6. Press the "Source" button on the projector or use the remote control to select the HDMI input source.
7. Your laptop screen should now be displayed on the projector screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Optoma LH150 DLP Projector.
Add New Comment