User Manual Q&AAnswer
Jan 01, 2025 - 08:52 PM
To load the ZINK paper into the camera, follow these steps:
1. Open the paper tray in the back of the camera by releasing the tray cover at the rear of the device. Press down on the arrow and slide the cover toward you.
2. Load the blue calibration sheet with the barcode facing down. Place the other plain sheets on top with the glossy side facing you. Avoid touching the glossy side to prevent fingerprints.
3. When you take your first photo after loading the ZINK paper, the blue calibration sheet will be slowly ejected from the printing slot. Your photo will print after the calibration sheet finishes. Make sure not to push the paper in too far to avoid jamming or misprinting issues.
For more detailed instructions, please refer to the "Getting Ready for Use" section in the operational guide provided with the camera.
Add New Comment