User Manual Q&AAnswer
Jan 01, 2025 - 05:23 AM
To replace the batteries in the Emerson 1E78-140 thermostat, follow these steps:
1. Remove the thermostat body from the base by gently pulling it straight off.
2. Locate the battery compartment on the back of the thermostat body.
3. Open the battery compartment by sliding the cover off.
4. Remove the old batteries from the compartment.
5. Insert two fresh AAA alkaline batteries into the compartment, making sure to align the positive (+) and negative (-) ends correctly.
6. Close the battery compartment by sliding the cover back on.
7. Reattach the thermostat body to the base by lining up the body with the base and pressing gently until it snaps into place.
Note: If the display is blank after replacing the batteries, press any button to activate the display. If the display remains blank or the thermostat still does not function correctly, contact a qualified service person or the place of purchase for further assistance.
For more detailed instructions and illustrations, please refer to the user manual provided with the thermostat.
Add New Comment