User Manual Q&AAnswer
Jan 01, 2025 - 05:16 AM
To pair your smartphone to the Pyle PWA20BT Audio Control Wall Plate Receiver via Bluetooth, follow these steps:
1. Ensure that the amplifier is powered on and the volume is set to the minimum position.
2. Pull out the Bluetooth antenna located at the back panel of the unit for better reception.
3. Press the BT/Line button switch on the front panel of the unit. You will hear a "POWER ON" voice prompt followed by "PAIRING". This indicates that the unit is ready to pair with your external device.
4. On your smartphone, enable Bluetooth and search for available Bluetooth devices within range.
5. From the list of pairing devices, select "BT-RY" to connect to the Pyle PWA20BT.
6. If the pairing is successful, you will hear a prompt saying "Your Device is Connected".
7. You can now play music on your smartphone, and it will be transmitted wirelessly to the amplifier's speakers.
For further instructions and troubleshooting, refer to the user guide provided with the product.
Add New Comment