User Manual Q&AAnswer
Jan 01, 2025 - 05:15 AM
To connect the Rockville D4-70 White Wall Mount Speaker to an amplifier or receiver, you will need to follow these steps:
1. Make sure the speakers are passive and require an amplifier or receiver to power them.
2. Determine the impedance of your speakers. The Rockville D4-70 White Wall Mount Speaker is available in 8 ohms or 16 ohms.
3. Choose an amplifier or receiver that matches the impedance of your speakers. The amplifier should be rated for 4 or 8 ohms.
4. Use the appropriate gauge wire for the distance between the amplifier and the speakers. For distances up to 50 feet, a 16 gauge wire can be used. For longer distances, it is recommended to use 12 or 14-gauge wire.
5. Connect the wire from the positive speaker terminal to the red or positive terminal of the amplifier. Connect the wire from the negative speaker terminal to the black or negative terminal of the amplifier. Make sure to observe proper polarity.
6. Once the connections are made, power on the amplifier or receiver and adjust the volume accordingly.
Please refer to the Rockville D4-70 White Wall Mount Speaker Owner's Manual for more detailed instructions and illustrations on connecting the speakers to an amplifier or receiver.
Add New Comment