User Manual Q&AAnswer
Jan 01, 2025 - 05:14 AM
To connect your Optoma TH1060 DLP Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector. The TH1060 model supports both VGA and HDMI connections.
3. Connect one end of the VGA or HDMI cable to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer. Most computers have a VGA port, but newer models may also have an HDMI port.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your computer.
6. Turn on your computer and wait for it to fully boot up.
7. Turn on the Optoma TH1060 projector.
8. Press the "Source" button on the projector or the remote control to select the input source. Use the arrow keys to navigate to the desired input source (VGA or HDMI) and press the "Enter" button to confirm.
9. Adjust the projector settings if necessary, such as the aspect ratio or screen size, using the menu options on the projector or the remote control.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the Optoma TH1060 DLP Projector. You can access the user guide by clicking on the following link: [Optoma TH1060 User Guide](https://manuals.plus/wp-content/uploa...)
Add New Comment