User Manual Q&AAnswer
Jan 01, 2025 - 05:12 AM
To pair the Furrion Vision S Sharkfin Rear Doorway Security Camera with the monitor, follow these steps:
1. Make sure both the camera and monitor have power supplied during the pairing process.
2. For the 4.3" Vision S Camera System:
- Use the up or down button to highlight the "PAIRING" menu on the monitor.
- Press the enter button to enter the next page.
- Press the "MONITOR PAIRING" button at the bottom of the selected camera for pairing.
- Once paired successfully, a red icon will appear after the device list.
- If pairing fails, repeat steps 2 and 3 to pair again.
- Repeat steps 1 to 4 to pair the other cameras.
3. For the 5" and 7" Vision S Camera System:
- Touch the "PAIRING" option on the screen. The option will be highlighted in red once selected and enter the submenu automatically.
- Select the desired camera you want to pair.
- Press and hold the "MONITOR PAIRING" button at the bottom of the selected camera for 3 seconds to initiate pairing.
- Once paired successfully, a red icon will appear after the device list.
- If pairing fails, repeat steps 2 and 3 to pair again.
- Repeat steps 1 to 4 to pair the other cameras.
Please refer to the "Camera Settings" or "General Setup" sections in the user manual for more detailed settings and customization options for the camera and monitor.
Note: The Furrion Vision S Sharkfin Rear Doorway Security Camera is designed to work with the Furrion monitor and may not be compatible with other monitor systems.
Add New Comment