User Manual Q&AAnswer
Jan 01, 2025 - 05:02 AM
To connect your turntable to the Rockville RPP2 preamp, you will need audio cables. Follow these steps:
1. Locate the left and right audio cables coming from your turntable.
2. Connect the left and right audio cables to the phono preamp's input ports. The RPP2 preamp has L and R inputs on two RCAs.
3. If your turntable has a ground wire, connect it to the ground post on the preamp. This helps reduce any unwanted noise or hum.
4. Once the connections are made, you can then connect the preamp's output to your preferred amplifier or home audio receiver. The RPP2 preamp has two RCA (L & R) outputs for volume control. You can also use the TRS output in 1 1/4" with volume control if needed.
For more detailed instructions and illustrations, please refer to the owner's manual provided with the Rockville RPP2 preamp.
Add New Comment