User Manual Q&AAnswer
Jan 01, 2025 - 04:48 AM
To connect your laptop to the FAVI J5-LED-PICO projector, follow these steps:
1. Connect one end of the VGA cable to the projector and the other end to your laptop.
2. Press the Source button on the touch panel of the projector or on the remote to select the VGA channel.
3. If the projector does not display VGA when turned on, please check the following:
- Ensure that the VGA cable is connected properly and the input source is changed to VGA.
- Set the resolution of your laptop to 1280 x 800.
- Turn on the external video port on your laptop and press FN + screen switching key to switch the display information to the projector.
Note: These instructions are based on the information provided in the FAVI J5-LED-PICO HD 720p Video Projector Operational Guide.
Add New Comment