User Manual Q&AAnswer
Jan 01, 2025 - 04:39 AM
To connect your Glisogo C11 Bluetooth 1080P Supported Movie Projector to Wi-Fi, follow these steps:
1. Make sure your Wi-Fi network is turned on and working properly.
2. On the projector's remote control, press the "Menu" button to access the main menu.
3. Use the arrow keys on the remote control to navigate to the "Settings" option and press the "OK" button.
4. In the settings menu, select the "Network" option and press the "OK" button.
5. Select the "Wi-Fi" option and press the "OK" button.
6. The projector will search for available Wi-Fi networks. Select your desired network from the list and press the "OK" button.
7. If your Wi-Fi network is password-protected, a virtual keyboard will appear on the screen. Use the arrow keys on the remote control to navigate to each character of your Wi-Fi password and press the "OK" button to enter it.
8. Once you have entered the password, select the "Connect" option and press the "OK" button.
9. The projector will attempt to connect to the Wi-Fi network. Once connected, you will see a confirmation message on the screen.
Please note that the specific steps may vary slightly depending on the firmware version of your . For more detailed instructions, refer to the user manual provided with the product.
Add New Comment