User Manual Q&AAnswer
Jan 01, 2025 - 04:27 AM
To connect the wireless transmitter to the receiver, follow these steps:
1. Locate the AUDIO OUT jack on the back of your stereo receiver.
2. Take one end of the audio cable (included in the box) and connect it to the AUDIO OUT jack on the stereo receiver.
3. Locate the AUDIO IN jack on the back of the transmitter.
4. Take the other end of the audio cable and connect it to the AUDIO IN jack on the transmitter.
5. Connect the power adapter for the transmitter to the DC IN 9V jack on the rear of the device.
6. Ensure that both the transmitter and receiver are powered on.
7. The transmitter and receiver will automatically pair with each other. The LINK LED on both modules should begin to blink.
8. After approximately 5 seconds of blinking, the transmitter and receiver will be connected and ready to use.
Please refer to the user manual for more detailed instructions and illustrations on how to connect the wireless transmitter to the receiver.
Add New Comment