User Manual Q&AAnswer
Jan 01, 2025 - 04:15 AM
To set up the AERVY WR-302S WiFi Range Extender Signal Booster, follow these steps:
1. Plug the WiFi extender into a power outlet near your WiFi router.
2. Wait for the extender's power LED to turn solid green.
3. Press the WPS button on your router and then press the WPS button on the extender within 2 minutes.
4. Wait for the extender's WiFi LED to turn solid green, indicating a successful connection.
5. Use your device (phone, tablet, computer) to connect to the extender's WiFi network. The network name should be "AERVY_EXT."
6. Open a web browser and enter "http://ap.setup" or "http://192.168.10.1" in the address bar.
7. Follow the on-screen instructions to complete the setup process. You may need to enter your existing WiFi network's password.
8. Once the setup is complete, the extender will reboot and connect to your existing WiFi network.
Note: If the WPS method doesn't work, you can also set up the extender using the web browser method. Connect your device to the extender's WiFi network and follow steps 6-8.
For more detailed instructions and troubleshooting tips, please refer to the AERVY WR-302S WiFi Range Extender Signal Booster User Manual.
Add New Comment