User Manual Q&AAnswer
Jan 01, 2025 - 04:10 AM
To set up and use the Galaxy Audio AS-1100R Wireless Receiver Spot P2 Band, please follow the steps below:
1. Power on the receiver: Insert two AA batteries into the receiver and turn it on using the power switch.
2. Select a channel: Use the channel selector buttons on the receiver to choose the desired channel. The receiver offers 120 channels to choose from.
3. Connect headphones: Plug your headphones into the headphone output on the receiver.
4. Adjust volume: Use the volume control xxxx on the receiver to adjust the volume level of the headphones.
5. Check RF and AF indicators: The receiver features RF and AF indicators. The RF indicator shows the strength of the received signal, while the AF indicator shows the audio signal level. Make sure these indicators are within the desired range for optimal performance.
6. Monitor battery life: The receiver has a 4-bar battery life indicator on the LCD screen. Keep an eye on this indicator to ensure you have sufficient battery power.
For more detailed instructions and troubleshooting information, please refer to the Galaxy Audio AS-1100R Wireless Receiver Spot P2 Band User Guide.
Add New Comment