User Manual Q&AAnswer
Jan 01, 2025 - 03:51 AM
Sure! Here are the step-by-step instructions to install the NETGEAR RBKWM-10000S Orbi Wall Mount for your Orbi WiFi Router:
1. Prepare the wall mount: Make sure you have the wall mount cover, wall mount bracket, cradle (if needed), xxxx kit, and wall mount anchor set from the package.
2. Determine if your wall mount needs the cradle: If your Orbi model has mounting holes on the bottom, you can install the wall mount without the cradle. If your Orbi model is smaller and requires the cradle, proceed to step 3.
3. Install the wall mount with the cradle for smaller Orbi products: Adjust the cradle to fit your smaller Orbi product. Follow the instructions provided on the other side of the quick start guide.
4. Install the wall mount without the cradle: Use this method if your Orbi model has mounting holes on the bottom. Follow the instructions provided on the other side of the quick start guide.
5. Use the included xxxx kit: Secure your Orbi router or satellite to the mount base using the screws provided. Make sure it is firmly attached.
6. Connect the mount base with the mount cover: Slide the mount base onto the wall bracket and connect it with the mount cover. Ensure a secure fit.
7. Fasten the wall bracket to the wall: Use the wall anchors and screws provided to securely fasten the wall bracket to the wall. Make sure it is properly aligned and tightened.
8. Enjoy the benefits: Once the wall mount is installed, you can experience improved WiFi performance, reduced signal interference, and a clutter-free space.
For more detailed instructions and illustrations, please refer to the Quick Start Guide provided with the NETGEAR RBKWM-10000S Orbi Wall Mount.
If you have any further questions or need additional assistance, you can visit netgear.com/support or check out the NETGEAR Community for helpful advice.
Add New Comment