User Manual Q&AAnswer
Jan 01, 2025 - 03:49 AM
To connect the FLEXSON FLXVP1021US VinylPlay Digital Turntable to your audio system, follow these steps:
1. Ensure that your audio system has an available line-level input (such as AUX or RCA inputs).
2. Locate the RCA cables included with the VinylPlay turntable. These cables have red and white connectors on each end.
3. Connect one end of the RCA cables to the RCA output jacks on the back of the VinylPlay turntable. The red cable should be connected to the right channel (R) output, and the white cable should be connected to the left channel (L) output.
4. Connect the other end of the RCA cables to the corresponding line-level input jacks on your audio system. Make sure to match the red cable to the right channel input and the white cable to the left channel input.
5. Once the connections are made, power on your audio system and set it to the appropriate input source.
6. Power on the VinylPlay turntable by pressing the power button located on the front panel.
7. You may need to adjust the volume levels on both the turntable and your audio system to achieve the desired sound level.
Please refer to the user manual for additional information and troubleshooting tips related to the FLEXSON FLXVP1021US VinylPlay Digital Turntable.
Add New Comment