How do I set up the Linksys RE7000 WiFi Extender as a wireless range extender? (Linksys RE7000 WiFi 5 Range Extender Operational Manual)

Answer

manuals.plus

Jan 01, 2025 - 03:46 AM

Sure! Here are the step-by-step instructions to set up the Linksys RE7000 WiFi Extender as a wireless range extender:

1. Plug the Linksys RE7000 into a power outlet near your existing router.
2. Wait for the Power LED on the front panel of the extender to turn solid green, indicating that it is ready to use.
3. On your computer or mobile device, go to the Wi-Fi settings and connect to the default Wi-Fi network name (SSID) of the extender, which is usually "Linksys Extender Setup."
4. Open a web browser and enter "http://extender.linksys.com" in the address bar. Press Enter.
5. You will be prompted to create an admin password for the extender. Follow the on-screen instructions to set a password and click Next.
6. Select your existing Wi-Fi network from the list of available networks and click Next.
7. Enter your Wi-Fi network password and click Next.
8. You will have the option to change the extended network name (SSID) and password. You can either keep the default settings or customize them according to your preference. Click Next.
9. The extender will apply the settings and connect to your existing Wi-Fi network. This process may take a few minutes.
10. Once the setup is complete, you will see a confirmation message. You can now disconnect from the extender's Wi-Fi network and connect to the extended network using the new network name (SSID) and password.

Please note that these instructions are a general guide, and the exact steps may vary slightly depending on your specific model and firmware version. For more detailed instructions, you can refer to the operational manual provided with the Linksys RE7000 WiFi Extender.