User Manual Q&AAnswer
Jan 01, 2025 - 03:37 AM
Sure! Here's a step-by-step guide on how to set up the Hauppauge 1578 Digital TV Tuner for Xbox One:
1. Connect the Hauppauge Digital TV Tuner to the telescoping 10-mile antenna (included) or a high-powered antenna (optional) using a coax cable. Place the antenna in an area likely to get good reception, such as a window.
2. Connect the USB extension cable onto the Hauppauge Digital TV Tuner. Then plug the other end of the USB extension cable into a USB port on the back of your Xbox One. Any unused Xbox One USB port can be used.
3. When the "TV Tuner Detected" notification pops up, hold the Xbox button on your Xbox One controller to begin setup.
4. Enter your ZIP code to scan for channels. This will take a few minutes. Review the scan results and see if you're getting the channels that you expected. If you are missing channels, try repositioning your antenna and scan again. Once the channel scan is complete, follow the on-screen instructions to begin watching TV.
Additionally, here are some tips and tricks for using the Hauppauge 1578 Digital TV Tuner:
- You can hit X on your Xbox One controller at any time while watching TV to pull up the OneGuide and see what's on.
- If Live Pause is enabled, hit A to pause, rewind, and fast-forward while watching TV.
- Download the Xbox SmartGlass app for iOS, Android, or Windows devices to stream over-the-air TV anywhere in the home. You can also snap TV to watch TV while you play games.
If you encounter any issues or have further questions, you can refer to the troubleshooting section in the manual or contact Hauppauge support (contact details provided in the manual).
Add New Comment