User Manual Q&AAnswer
Jan 01, 2025 - 03:24 AM
To set up the NOBVEQ 300 Mbps WiFi Extender WiFi Booster, follow these steps:
1. Plug the extender into an outlet close to your router to ensure a strong WiFi signal.
2. Look for the WiFi network named "WiFi-XXXX" on your device's WiFi settings. The "XXXX" represents the final four characters of the extender's Mac address, which can be found on the back of the device.
3. Connect to the "WiFi-XXXX" network using the provided password.
4. Open a web browser and enter "mywifiext.net" in the address bar.
5. Follow the on-screen instructions to complete the setup process, including selecting your existing WiFi network and entering the password.
6. Once the setup is complete, you can place the extender in the desired location where you want to extend WiFi coverage. Make sure the location receives a good WiFi signal from your router.
Note: For detailed instructions and troubleshooting, refer to the instruction manual provided with the NOBVEQ 300 Mbps WiFi Extender WiFi Booster.
Add New Comment