User Manual Q&AAnswer
Jan 01, 2025 - 03:23 AM
To set up the TECHFACTURE 450 mbps WiFi Extenders Signal Booster, follow these steps:
1. Unbox the WiFi extender and gather all the components.
2. Connect the WiFi extender to a power source using the provided power adapter.
3. Place the WiFi extender in a location that is within the range of your existing WiFi router.
4. Press the WPS button on your WiFi router.
5. Within 2 minutes, press the WPS button on the WiFi extender.
6. Wait for the WiFi extender to establish a connection with your WiFi router. This may take a few minutes.
7. Once the connection is established, the WiFi extender will start boosting the WiFi signal in your home.
8. Connect your devices to the WiFi extender's network using the WiFi password provided in the manual.
Note: If your WiFi router does not have a WPS button, you can also set up the WiFi extender using the web interface. Connect your device to the WiFi extender's network and open a web browser. Enter the default IP address of the WiFi extender (usually printed on the device or in the manual) and follow the on-screen instructions to complete the setup.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the TECHFACTURE 450 mbps WiFi Extenders Signal Booster.
Add New Comment