User Manual Q&AAnswer
Jan 01, 2025 - 02:50 AM
Sure! Here are the step-by-step instructions to set up the TECHFACTURE 450mbps WiFi Extender:
1. Plug the WiFi extender into a power outlet within range of your existing WiFi router.
2. Wait for the power LED indicator on the extender to turn solid.
3. On your WiFi router, locate the WPS button (usually labeled as such).
4. Press and hold the WPS button on your WiFi router for a few seconds.
5. Within 2 minutes, press the WPS button on the WiFi extender.
6. The WiFi extender will now establish a connection with your WiFi router. Wait for the connection to be established, which may take a couple of minutes.
7. Once the connection is established, the WiFi extender's signal LED indicator will turn solid.
8. You can now connect your devices to the WiFi extender's network using the same WiFi network name (SSID) and password as your existing WiFi router.
Note: If your WiFi router does not have a WPS button, you can also set up the WiFi extender using the web-based setup page. Connect your device to the WiFi extender's network, open a web browser, and enter "http://tplinkrepeater.net" or "http://192.168.0.254" in the address bar. Follow the on-screen instructions to complete the setup.
For more detailed instructions and troubleshooting tips, please refer to the TECHFACTURE 450mbps WiFi Extender Internet User Guide that came with the product.
Add New Comment