User Manual Q&AAnswer
Jan 01, 2025 - 02:48 AM
Sure! Here are the step-by-step instructions for assembling and installing the Onkyo CP-1050 Direct-Drive Turntable:
1. Mounting the turntable and rubber mat:
a. Insert the turntable onto the center spindle.
b. Lay the rubber mat on top of the turntable.
2. Mounting the headshell:
a. Fit the headshell into the tonearm, keeping it horizontal.
b. Tighten the locking nut to secure the headshell.
3. Mounting the counterweight:
a. Mount the counterweight on the shaft at the back of the tonearm.
b. Make sure the white center line on the shaft is visible.
4. Installation:
a. Place the turntable on a horizontal surface protected from vibrations.
b. Avoid placing the turntable on top of an amplifier or speaker system.
c. Install the turntable away from direct sunlight, dust, humidity, and heat sources.
d. Keep the turntable away from TVs, radios, or VCRs to avoid interference.
e. Adjust the height of the insulators to make the turntable horizontal.
These are the basic steps for assembling and installing the turntable. For more detailed instructions and illustrations, please refer to the Onkyo CP-1050 Direct-Drive Turntable User Guide.
Add New Comment